specifications: [[item.skuinfo]]
price: [[item.currency]][[item.price]]
Price
This store has earned the following certifications.
Product Description: Stud Finder Wall Scanner
Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! And a good stud finder can be the difference between a successful DIY home project and disaster. That is why a stud finder is important.
The JAXWQ stud finder uses UPGRADED SMART SENSORS which can sense the change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. You will not worry about drilling many error holes on the wall while putting up a TV bracket, shelf unit, or even just a set of coat hooks on drywall.
How to use AC mode: 1. Put the tool in the air and press the ON/OFF button to turn it on, then choose AC mode or Metal mode. 2. Press the Calibrate Button to start calibration. The decreasing bars will disappear, and the buzzer will beep once to confirm the calibration is completed. Then release the scan button. 3. Place the whole device against the wall, slowly slide the tool across the surface. Mark the location where you get the highest AC indication (the most middle bars on the screen). If it is a strong target, the top indicated arrow will show, and a steady beep will sound. Continue in the same direction until display bars reduce. Reverse direction and mark the spot where the display bars peak from the reversed direction. The midpoint of the two marks is the location of the center of the live AC wiring. 4. To further pinpoint the location of the live AC wiring, scan the area again. Release the Scan button and then turn the unit back on, this time starting on the wall over one of the previous marks. This will reset the tool to lower sensitivity and narrow the scan area. 5. Scan in both directions as in Step 3. The area indicated should become smaller so you can more precisely identify the location of live AC wires.
Stud Scan Detection: This stud locator has 3 stud scan modes. Deep Scan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. DeepScan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in the 0.5in. or 1 in. StudScan Mode first.
After you detect the center of an object, please use Metal Scan to determine if the reading in Stud scan mode was a wood stud, metal stud, or pipe.
Metal Scan Detection: JAXWQ wall detector can locate metal studs in StudScan mode, DeepScan mode, and Metal Scan Modes. Since JAXWQ stud finders are looking for a change in density behind drywall, not a particular material, in StudScan and DeepScan Modes the detector will react to metal studs the same as it would for wooden studs.
Wire Warning Detection: Wire Warning detection indicates the presence of live, unshielded electrical wiring up to 2 inches (51 mm) deep. For Safety, in all modes, this wall scanner always detects and indicates the Live AC Wire.
Accurate and Rapid: The wall stud finder adopts an intelligent micro-sensor chip with the highest sensitivity which can accurately and quickly find edges and center of metal, studs, joists, pipes, and live AC wire behind walls, floors, and ceilings. Fast detection saves users time and effort, making task completion easier.
High Visibility & Comprehensive Display: Our stud scanner is equipped with a bright, backlit LCD display that shows the center, edge, and location of detected studs, as well as the battery status. Along with the visual display, our stud finder also provides audio alerts and a beep sound to help guide you to the exact location of the stud.
Multiple Scan Modes: Our wood stud finder offers multiple scan modes, including stud scan, deep scan, and metal scan, giving you the ability to detect various materials and depths.
Unique Home Improvement Gifts: Our stud finder is a practical and useful tool for men/women who want to hang shelves or other heavy objects on the wall without damaging the surface. Moreover, it is handy for detecting live wires and pipes behind the walls, preventing accidents and costly repairs.
Wide Use: Our wood detector for wall is a versatile, reliable, and user-friendly tool that can make any job more efficient and effective. This stud detector quickly locates wood, metal, and AC wires hidden in the walls, floors, and ceilings of the house.
product information:
Attribute | Value | ||||
---|---|---|---|---|---|
manufacturer | JAXWQ | ||||
part_number | 410-A-O-1 | ||||
item_weight | 7.8 ounces | ||||
package_dimensions | 7.8 x 3.31 x 1.73 inches | ||||
color | pumpkin Orange | ||||
batteries_included | No | ||||
batteries_required | Yes | ||||
battery_cell_type | Zinc | ||||
customer_reviews |
| ||||
best_sellers_rank | #80 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #1 in Stud Finders & Scanners | ||||
date_first_available | March 20, 2024 |
MORE FROM kiplyki stud detctor
MORE FROM recommendation